dmesg - i5 with watercooling
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-12-generic (buildd@allspice) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu7) ) #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 (Ubuntu 3.11.0-12.19-generic 3.11.3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dd645fff] usable
BIOS-e820: [mem 0x00000000dd646000-0x00000000dd99efff] reserved
BIOS-e820: [mem 0x00000000dd99f000-0x00000000dd9aefff] ACPI data
BIOS-e820: [mem 0x00000000dd9af000-0x00000000ddad1fff] ACPI NVS
BIOS-e820: [mem 0x00000000ddad2000-0x00000000de7f4fff] reserved
BIOS-e820: [mem 0x00000000de7f5000-0x00000000de7f5fff] usable
BIOS-e820: [mem 0x00000000de7f6000-0x00000000de838fff] ACPI NVS
BIOS-e820: [mem 0x00000000de839000-0x00000000dec6cfff] usable
BIOS-e820: [mem 0x00000000dec6d000-0x00000000deff3fff] reserved
BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: System manufacturer System Product Name/P8Z77-V LK, BIOS 1104 08/23/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FF0000000 write-back
2 base 210000000 mask FF8000000 write-back
3 base 218000000 mask FFC000000 write-back
4 base 21C000000 mask FFE000000 write-back
5 base 21E000000 mask FFF000000 write-back
6 base 0E0000000 mask FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 256MB, type WB
reg 2, base: 8448MB, range: 128MB, type WB
reg 3, base: 8576MB, range: 64MB, type WB
reg 4, base: 8640MB, range: 32MB, type WB
reg 5, base: 8672MB, range: 16MB, type WB
reg 6, base: 3584MB, range: 512MB, type UC
total RAM covered: 8176M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 512MB, type WB
reg 5, base: 8688MB, range: 16MB, type UC
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd860-0x000fd86f] mapped at [ffff8800000fd860]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd1000, 0x01fd1fff] PGTABLE
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
init_memory_mapping: [mem 0x21ee00000-0x21effffff]
[mem 0x21ee00000-0x21effffff] page 2M
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x21c000000-0x21edfffff]
[mem 0x21c000000-0x21edfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21bffffff]
[mem 0x200000000-0x21bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xdd645fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xdd5fffff] page 2M
[mem 0xdd600000-0xdd645fff] page 4k
init_memory_mapping: [mem 0xde7f5000-0xde7f5fff]
[mem 0xde7f5000-0xde7f5fff] page 4k
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
init_memory_mapping: [mem 0xde839000-0xdec6cfff]
[mem 0xde839000-0xde9fffff] page 4k
[mem 0xdea00000-0xdebfffff] page 2M
[mem 0xdec00000-0xdec6cfff] page 4k
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0xdeff4000-0xdeffffff]
[mem 0xdeff4000-0xdeffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
RAMDISK: [mem 0x35eec000-0x36f6dfff]
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI: XSDT 00000000dd9a2078 00064 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000dd9acd30 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000dd9a2170 0ABBB (v02 ALASKA A M I 00000022 INTL 20051117)
ACPI: FACS 00000000ddad0080 00040
ACPI: APIC 00000000dd9ace40 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000dd9aceb8 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000dd9acf00 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000dd9acf40 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000dd9acf78 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000dd9adcf0 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: SSDT 00000000dd9ad340 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021effffff]
Initmem setup node 0 [mem 0x00000000-0x21effffff]
NODE_DATA [mem 0x21eff1000-0x21eff5fff]
[ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216600000-ffff88021e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x21effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xdd645fff]
node 0: [mem 0xde7f5000-0xde7f5fff]
node 0: [mem 0xde839000-0xdec6cfff]
node 0: [mem 0xdeff4000-0xdeffffff]
node 0: [mem 0x100000000-0x21effffff]
On node 0 totalpages: 2083363
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 14123 pages used for memmap
DMA32 zone: 903815 pages, LIFO batch:31
Normal zone: 18368 pages used for memmap
Normal zone: 1175552 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdd646000-0xdd99efff]
PM: Registered nosave memory: [mem 0xdd99f000-0xdd9aefff]
PM: Registered nosave memory: [mem 0xdd9af000-0xddad1fff]
PM: Registered nosave memory: [mem 0xddad2000-0xde7f4fff]
PM: Registered nosave memory: [mem 0xde7f6000-0xde838fff]
PM: Registered nosave memory: [mem 0xdec6d000-0xdeff3fff]
PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88021ec00000 s86720 r8192 d23872 u524288
pcpu-alloc: s86720 r8192 d23872 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2050787
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8102344K/8333452K available (7141K kernel code, 1082K rwdata, 3260K rodata, 1364K init, 1420K bss, 231108K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:712 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3502.440 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7004.88 BogoMIPS (lpj=14009760)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27796 entries in 109 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (fam: 06, model: 3a, stepping: 09)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 OK
Brought up 4 CPUs
smpboot: Total of 4 processors activated (28019.52 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xdd9af000-0xddad1fff] (1191936 bytes)
PM: Registering ACPI NVS region [mem 0xde7f6000-0xde838fff] (274432 bytes)
regulator-dummy: no parameters
RTC time: 9:20:11, date: 02/27/14
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000dd94c018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000dd94da98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000dd94ec18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x18) granted
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7300000-0xf730ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf731a000-0xf731a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7318000-0xf73183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7310000-0xf7313fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7317000-0xf73173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7316000-0xf73167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7315000-0xf73150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:1189] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: PCI bridge to [bus 04-05] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:1c.5: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.5: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
pci 0000:05:00.0: [168c:002d] type 00 class 0x028000
pci 0000:05:00.0: reg 0x10: [mem 0xf7200000-0xf720ffff]
pci 0000:05:00.0: PME# supported from D0 D3hot
pci 0000:05:01.0: [1131:7133] type 00 class 0x048000
pci 0000:05:01.0: reg 0x10: [mem 0xf7210000-0xf72107ff]
pci 0000:05:01.0: supports D1 D2
pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0xf7200000-0xf72fffff] (subtractive decode)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
pci 0000:06:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xf7100000-0xf7107fff 64bit]
pci 0000:06:00.0: PME# supported from D3hot D3cold
pci 0000:06:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.7: PCI bridge to [bus 06]
pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdd646000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde7f6000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdec6d000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x1000-0x100f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x0453] could not be reserved
system 00:04: [io 0x0458-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [io 0x0290-0x029f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0a: [dma 0 disabled]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0b: [mem 0xe0000000-0xe0000fff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:00.0: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:1c.5: PCI bridge to [bus 04-05]
pci 0000:00:1c.5: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:1c.7: PCI bridge to [bus 06]
pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:04:00.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xf7200000-0xf72fffff]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:04: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:05: resource 1 [mem 0xf7200000-0xf72fffff]
pci_bus 0000:05: resource 5 [mem 0xf7200000-0xf72fffff]
pci_bus 0000:05: resource 8 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 9 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:05: resource 17 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:06: resource 1 [mem 0xf7100000-0xf71fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16904K (ffff880035eec000 - ffff880036f6e000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd9646000-0xdd646000] (64MB) mapped at [ffff8800d9646000-ffff8800dd645fff]
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1393492811.388:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15857
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7318000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7317000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:06:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 46 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb5: SerialNumber: 0000:06:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb6: SerialNumber: 0000:06:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: fddf6943d8ac4f5b6eb0919a7a3ee3d9088b1bfa'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 2:229:324
tty tty49: hash matches
acpi PNP0B00:00: hash matches
rtc_cmos 00:05: setting system clock to 2014-02-27 09:20:11 UTC (1393492811)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1040K (ffff8800016fc000 - ffff880001800000)
Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
systemd-udevd[116]: starting version 204
mii: module verification failed: signature and/or required key missing - tainting kernel
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0: irq 48 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168f/8111f at 0xffffc90000c2a000, 10:bf:48:85:35:76, XID 08000800 IRQ 48
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x27 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7316000 port 0xf7316100 irq 47
ata2: SATA max UDMA/133 abar m2048@0xf7316000 port 0xf7316180 irq 47
ata3: SATA max UDMA/133 abar m2048@0xf7316000 port 0xf7316200 irq 47
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xf7316000 port 0xf7316380 irq 47
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff8802130992a8), AE_NOT_FOUND (20130517/psparse-536)
ata2.00: ATA-9: Samsung SSD 840 Series, DXT06B0Q, max UDMA/133
ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff8802130992a8), AE_NOT_FOUND (20130517/psparse-536)
ata2.00: configured for UDMA/133
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff880213099320), AE_NOT_FOUND (20130517/psparse-536)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff880213099488), AE_NOT_FOUND (20130517/psparse-536)
ata6.00: ATAPI: Optiarc DVD RW AD-7280S, 1.01, max UDMA/100
ata3.00: ATA-8: WDC WD5000AAKX-22ERMA0, 17.01H17, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff880213099488), AE_NOT_FOUND (20130517/psparse-536)
ata6.00: configured for UDMA/100
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff880213099320), AE_NOT_FOUND (20130517/psparse-536)
ata3.00: configured for UDMA/133
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff880213099230), AE_NOT_FOUND (20130517/psparse-536)
ata1.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff880213099230), AE_NOT_FOUND (20130517/psparse-536)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 DXT0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKX-2 17.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 5:0:0:0: CD-ROM Optiarc DVD RW AD-7280S 1.01 PQ: 0 ANSI: 5
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg3 type 5
sdc: sdc1 sdc2 sdc3
sd 2:0:0:0: [sdc] Attached SCSI disk
sda: sda1 sda2 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 3-1: new full-speed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=17a0, idProduct=0002
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Studio Projects LSM
usb 3-1: Manufacturer: Studio Projects LSM
tsc: Refined TSC clocksource calibration: 3502.641 MHz
EXT4-fs (sdb2): INFO: recovery required on readonly filesystem
EXT4-fs (sdb2): write access will be enabled during recovery
EXT4-fs (sdb2): recovery complete
usb 5-2: new high-speed USB device number 2 using xhci_hcd
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
usb 5-2: New USB device found, idVendor=05e3, idProduct=0608
usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-2: Product: USB2.0 Hub
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 4 ports detected
usb 2-1.5: new full-speed USB device number 3 using ehci-pci
usb 2-1.5: New USB device found, idVendor=046d, idProduct=c245
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.5: Product: Gaming Mouse G400
usb 2-1.5: Manufacturer: Logitech
usb 2-1.6: new low-speed USB device number 4 using ehci-pci
usb 2-1.6: New USB device found, idVendor=046d, idProduct=c31c
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.6: Product: USB Keyboard
usb 2-1.6: Manufacturer: Logitech
usb 5-2.2: new low-speed USB device number 3 using xhci_hcd
usb 5-2.2: New USB device found, idVendor=04b4, idProduct=1002
usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2.2: Product: USB FM Radio
usb 5-2.2: Manufacturer: GemTek Corp
usb 5-2.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 5-2.3: new full-speed USB device number 4 using xhci_hcd
usb 5-2.3: New USB device found, idVendor=0cf3, idProduct=3005
usb 5-2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 5-2.4: new full-speed USB device number 5 using xhci_hcd
usb 5-2.4: New USB device found, idVendor=10c4, idProduct=ea60
usb 5-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2.4: Product: CP2102 USB to UART Bridge Controller
usb 5-2.4: Manufacturer: Silicon Labs
usb 5-2.4: SerialNumber: 0001
Switched to clocksource tsc
Adding 33202172k swap on /dev/sdc3. Priority:-1 extents:1 across:33202172k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[308]: starting version 204
lp: driver loaded but no devices found
EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
wmi: Mapper loaded
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
mei_me 0000:00:16.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
Linux video capture interface: v2.00
snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
cfg80211: Calling CRDA to update world regulatory domain
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
SKU: Nid=0x1d sku_cfg=0x4005e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
usbcore: registered new interface driver dsbr100
usbcore: registered new interface driver btusb
saa7130/34: v4l2 driver version 0, 2, 17 loaded
saa7133[0]: found at 0000:05:01.0, rev: 209, irq: 18, latency: 32, mmio: 0xf7210000
saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [card=101,autodetected]
hidraw: raw HID events driver (C) Jiri Kosina
saa7133[0]: board init: gpio is 600e000
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver cp210x
cp210x 5-2.4:1.0: cp210x converter detected
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input2
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Disabling 64bit DMA
usbcore: registered new interface driver snd-usb-audio
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hda-intel 0000:01:00.1: Enable delay in RIRB handling
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x17
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
usb 5-2.4: reset full-speed USB device number 5 using xhci_hcd
init: avahi-cups-reload main process (507) terminated with status 1
ppdev: user-space parallel port driver
xhci_hcd 0000:06:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020f253d40
xhci_hcd 0000:06:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020f253d00
usb 5-2.4: cp210x converter now attached to ttyUSB0
saa7133[0]: i2c eeprom 00: bd 11 2f 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: ff e0 60 06 ff 20 ff ff 00 30 8d 36 80 b1 ff ff
saa7133[0]: i2c eeprom 20: 01 2c 01 23 23 01 04 30 98 ff 00 e7 ff 21 00 c2
saa7133[0]: i2c eeprom 30: 96 10 03 32 15 20 ff 15 0e 6c a3 eb 04 e6 54 ed
saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
asus_wmi: ASUS WMI generic driver loaded
type=1400 audit(1393489215.462:2): apparmor="STATUS" operation="profile_load" parent=440 profile="unconfined" name="/sbin/dhclient" pid=444 comm="apparmor_parser"
type=1400 audit(1393489215.462:3): apparmor="STATUS" operation="profile_load" parent=440 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=444 comm="apparmor_parser"
type=1400 audit(1393489215.462:4): apparmor="STATUS" operation="profile_load" parent=440 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=444 comm="apparmor_parser"
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input10
tuner 0-004b: Tuner -1 found with type(s) Radio TV.
asus_wmi: Disabling ACPI video driver
input: Logitech Gaming Mouse G400 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input11
hid-generic 0003:046D:C245.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Gaming Mouse G400] on usb-0000:00:1d.0-1.5/input0
hid-generic 0003:046D:C245.0002: hiddev0,hidraw1: USB HID v1.10 Device [Logitech Gaming Mouse G400] on usb-0000:00:1d.0-1.5/input1
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input12
hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-1.6/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/input/input13
hid-generic 0003:046D:C31C.0004: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-1.6/input1
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x17
type=1400 audit(1393489215.498:5): apparmor="STATUS" operation="profile_replace" parent=502 profile="unconfined" name="/sbin/dhclient" pid=505 comm="apparmor_parser"
type=1400 audit(1393489215.498:6): apparmor="STATUS" operation="profile_replace" parent=502 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=505 comm="apparmor_parser"
type=1400 audit(1393489215.498:7): apparmor="STATUS" operation="profile_replace" parent=502 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=505 comm="apparmor_parser"
microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x17
microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x17
microcode: Microcode Update Driver: v2.00 , Peter Oruba
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
init: failsafe main process (599) killed by TERM signal
tda829x 0-004b: setting tuner address to 61
type=1400 audit(1393489215.582:8): apparmor="STATUS" operation="profile_replace" parent=756 profile="unconfined" name="/sbin/dhclient" pid=766 comm="apparmor_parser"
type=1400 audit(1393489215.582:9): apparmor="STATUS" operation="profile_replace" parent=756 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=766 comm="apparmor_parser"
type=1400 audit(1393489215.582:10): apparmor="STATUS" operation="profile_replace" parent=756 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=766 comm="apparmor_parser"
tda829x 0-004b: type set to tda8290+75a
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input14
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input15
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input16
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input17
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 319.32 Wed Jun 19 15:51:20 PDT 2013
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
audit_printk_skb: 60 callbacks suppressed
type=1400 audit(1393489218.430:31): apparmor="STATUS" operation="profile_load" parent=756 profile="unconfined" name="/usr/bin/evince" pid=770 comm="apparmor_parser"
type=1400 audit(1393489218.430:32): apparmor="STATUS" operation="profile_load" parent=756 profile="unconfined" name="sanitized_helper" pid=770 comm="apparmor_parser"
type=1400 audit(1393489218.430:33): apparmor="STATUS" operation="profile_load" parent=756 profile="unconfined" name="/usr/bin/evince-previewer" pid=770 comm="apparmor_parser"
type=1400 audit(1393489218.430:34): apparmor="STATUS" operation="profile_load" parent=756 profile="unconfined" name="sanitized_helper" pid=770 comm="apparmor_parser"
type=1400 audit(1393489218.430:35): apparmor="STATUS" operation="profile_load" parent=756 profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=770 comm="apparmor_parser"
type=1400 audit(1393489218.430:36): apparmor="STATUS" operation="profile_load" parent=756 profile="unconfined" name="sanitized_helper" pid=770 comm="apparmor_parser"
Registered IR keymap rc-pinnacle-color
input: i2c IR (Pinnacle PCTV) as /devices/virtual/rc/rc0/input18
rc0: i2c IR (Pinnacle PCTV) as /devices/virtual/rc/rc0
ir-kbd-i2c: i2c IR (Pinnacle PCTV) detected at i2c-0/0-0047/ir0 [saa7133[0]]
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio1
saa7134 ALSA driver for DMA sound loaded
saa7133[0]/alsa: saa7133[0] at 0xf7210000 irq 18 registered as card -2
dvb_init() allocating 1 frontend
DVB: registering new adapter (saa7133[0])
saa7134 0000:05:01.0: DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 48MHz sampling clock
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90005920000, irq=17
cfg80211: Calling CRDA for country: CN
cfg80211: Regulatory domain changed to country: CN
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm)
cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 58:6d:8f:38:06:f5
wlan0: send auth to 58:6d:8f:38:06:f5 (try 1/3)
wlan0: authenticated
ath9k 0000:05:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
ath9k 0000:05:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 58:6d:8f:38:06:f5 (try 1/3)
wlan0: RX AssocResp from 58:6d:8f:38:06:f5 (capab=0x411 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
init: udev-fallback-graphics main process (1133) terminated with status 1
init: plymouth-splash main process (1153) terminated with status 1
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 0 -- invalid
tda1004x: trying to boot from eeprom
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 0 -- invalid
tda1004x: waiting for firmware upload...
tda1004x: no firmware upload (timeout or file not found?)
tda1004x: firmware upload failed
systemd-hostnamed[2356]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
type=1400 audit(1393489276.001:37): apparmor="STATUS" operation="profile_replace" parent=2369 profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=2371 comm="apparmor_parser"
type=1400 audit(1393489276.001:38): apparmor="STATUS" operation="profile_replace" parent=2369 profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=2371 comm="apparmor_parser"
type=1400 audit(1393489276.017:39): apparmor="STATUS" operation="profile_replace" parent=2369 profile="unconfined" name="pxgsettings" pid=2371 comm="apparmor_parser"
type=1400 audit(1393489276.017:40): apparmor="STATUS" operation="profile_replace" parent=2369 profile="unconfined" name="sanitized_helper" pid=2371 comm="apparmor_parser"
type=1400 audit(1393489276.017:41): apparmor="STATUS" operation="profile_replace" parent=2369 profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=2371 comm="apparmor_parser"
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
NTFS driver 2.1.30 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
xor: automatically using best checksumming function:
avx : 12550.000 MB/sec
raid6: sse2x1 4538 MB/s
raid6: sse2x2 5647 MB/s
raid6: sse2x4 6506 MB/s
raid6: using algorithm sse2x4 (6506 MB/s)
raid6: using ssse3x2 recovery algorithm
bio: create slab at 1
Btrfs loaded
type=1400 audit(1393489345.186:42): apparmor="STATUS" operation="profile_replace" parent=20629 profile="unconfined" name="/sbin/dhclient" pid=20637 comm="apparmor_parser"
type=1400 audit(1393489345.186:43): apparmor="STATUS" operation="profile_replace" parent=20629 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=20637 comm="apparmor_parser"
type=1400 audit(1393489345.186:44): apparmor="STATUS" operation="profile_replace" parent=20629 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=20637 comm="apparmor_parser"
type=1400 audit(1393489345.198:45): apparmor="STATUS" operation="profile_replace" parent=20629 profile="unconfined" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=20634 comm="apparmor_parser"
type=1400 audit(1393489345.226:46): apparmor="STATUS" operation="profile_replace" parent=20629 profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=20635 comm="apparmor_parser"
type=1400 audit(1393489345.250:47): apparmor="STATUS" operation="profile_replace" parent=20629 profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=20636 comm="apparmor_parser"
type=1400 audit(1393489345.274:48): apparmor="STATUS" operation="profile_replace" parent=20629 profile="unconfined" name="chromium_browser" pid=20634 comm="apparmor_parser"
type=1400 audit(1393489345.274:49): apparmor="STATUS" operation="profile_replace" parent=20629 profile="unconfined" name="chromium_browser" pid=20636 comm="apparmor_parser"
type=1400 audit(1393489345.274:50): apparmor="STATUS" operation="profile_replace" parent=20629 profile="unconfined" name="chromium_browser" pid=20635 comm="apparmor_parser"
type=1400 audit(1393489345.366:51): apparmor="STATUS" operation="profile_replace" parent=20629 profile="unconfined" name="/usr/sbin/tcpdump" pid=20643 comm="apparmor_parser"
audit_printk_skb: 90 callbacks suppressed
type=1400 audit(1393489350.990:82): apparmor="STATUS" operation="profile_replace" parent=20691 profile="unconfined" name="/usr/bin/evince" pid=20700 comm="apparmor_parser"
type=1400 audit(1393489351.006:83): apparmor="STATUS" operation="profile_replace" parent=20691 profile="unconfined" name="sanitized_helper" pid=20700 comm="apparmor_parser"
type=1400 audit(1393489351.006:84): apparmor="STATUS" operation="profile_replace" parent=20691 profile="unconfined" name="/usr/bin/evince-previewer" pid=20700 comm="apparmor_parser"
type=1400 audit(1393489351.022:85): apparmor="STATUS" operation="profile_replace" parent=20691 profile="unconfined" name="sanitized_helper" pid=20700 comm="apparmor_parser"
type=1400 audit(1393489351.022:86): apparmor="STATUS" operation="profile_replace" parent=20691 profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=20700 comm="apparmor_parser"
type=1400 audit(1393489351.034:87): apparmor="STATUS" operation="profile_replace" parent=20691 profile="unconfined" name="sanitized_helper" pid=20700 comm="apparmor_parser"
type=1400 audit(1393490505.145:88): apparmor="STATUS" operation="profile_replace" parent=6065 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=6069 comm="apparmor_parser"
type=1400 audit(1393490505.145:89): apparmor="STATUS" operation="profile_replace" parent=6065 profile="unconfined" name="/usr/sbin/cupsd" pid=6069 comm="apparmor_parser"
type=1400 audit(1393490505.145:90): apparmor="STATUS" operation="profile_replace" parent=6065 profile="unconfined" name="/usr/sbin/cupsd" pid=6069 comm="apparmor_parser"